COB LED Strip Light High-Density 480/528 LEDs/m Flexible 8mm/10mm Tape Warm/Natural/Cool White + RGB DC12/24V

COB LED Strip Light High-Density 480/528 LEDs/m Flexible 8mm/10mm Tape Warm/Natural/Cool White + RGB DC12/24V

Yellow / 8mm PCB 24V 480Leds / 1m
$9.99
Skip to product information
COB LED Strip Light High-Density 480/528 LEDs/m Flexible 8mm/10mm Tape Warm/Natural/Cool White + RGB DC12/24V

COB LED Strip Light High-Density 480/528 LEDs/m Flexible 8mm/10mm Tape Warm/Natural/Cool White + RGB DC12/24V

$9.99

Illuminate any space with this high-density COB LED strip—smooth, continuous light ideal for under-cabinet, accent, display, and living room decor. Flexible tape, high CRI and multiple color temperatures deliver professional-quality lighting for home and commercial projects.

Specifications:

  • Item Type: LED Strip
  • LED Density: 480 / 528 LEDs per meter
  • LED Chip: Epistar SMD5050
  • Wattage: 480 LEDs/m – 10 W/m (≈3.05 W/ft); 528 LEDs/m – 14 W/m (≈4.27 W/ft)
  • Typical Power Consumption: 10–14 W/m (≈3.0–4.3 W/ft)
  • Input / Nominal Voltage: DC 12V / 24V
  • Power Source: DC (power supply not included)
  • FPCB Width: 480 LEDs/m – 8 mm (0.31 in); 528 LEDs/m – 10 mm (0.39 in)
  • Cutting Length: 480 LEDs/m – every 50 mm (≈1.97 in); 528 LEDs/m – every 45 mm (≈1.77 in)
  • Color Options / Temp (K): Yellow (2200–2400K), Warm White (3000–3200K), Natural White (4000–4200K), Cool White (6000–6500K), Red, Green, Blue
  • Color Temperature Range: 2200–6500 K
  • Color Rendering Index (CRI): Ra > 90
  • Luminous Flux: 249–2000 lm (varies by density and color)
  • Average Life: 35,000+ hours
  • Operating Temperature: -20°C to +45°C (-4°F to 113°F)
  • Storage Temperature: -20°C to +60°C (-4°F to 140°F)
  • Viewing Angle: 180°
  • Strip Type: SMD / COB
  • Waterproof: No
  • Adhesive Backing: Yes (3M-style adhesive on PCB; install on clean, smooth, dry surface)
  • Package: 1 × FCOB LED strip (Power supply, controller and connectors not included unless specified)

Important Notes:

  • Power: Use a dedicated DC12V or DC24V LED power supply. Do NOT connect to AC mains (110–240V) or 48V — dangerous and will damage the strip.
  • Connections: Standard 2-pin wire: Red = V+, Black = V-. Some short lengths (0.5m/1m/2m) include a 2-pin connector at one end only.
  • Installation: Cut only at marked shear points. Do not bend the strip sharply at the LED area. For long runs, inject power at both ends or additional points to reduce voltage drop.
  • Controller Compatibility: Do not use 2-in-1 power/controller units that omit a proper V- return; ensure your controller/power supply provides correct DC V+ and V- outputs.

#LEDLighting #COBStripLights #HomeDecor #FanzyMarket

You may also like