Description
Upgrade-ready replacement delivering sharper prints and improved light transmittance for 6.08-inch mono resin 3D printers. Designed for reliable performance and easier curing with reduced exposure times.
Specifications:
- Assembly Required: No
- Control Method: Others
- High-Concerned Chemical: None
- Item Shape: Flat
- Item Type: Module
- Model Number: PJ608-04
- Screen Size: 6.08 inch (154 mm)
- Resolution: 1620 × 2560 (2K)
- Panel Type: Mono LCD
- Transmittance: Higher transmittance vs previous DXQ-608 mono screens
- Compatibility: Compatible with many 6.08" mono LCD resin 3D printers; may require firmware update
- Recommended Exposure Settings: Exposure Time ~2s; Bottom Exposure Time ~25s (adjust by printer and resin)
Overview:
This high-transmittance 6.08" mono LCD is a direct replacement for compatible resin 3D printers that use 6.08-inch 2K panels. Increased light transmittance typically reduces required exposure times and can improve print speed while maintaining fine detail. Note: many printers will require a firmware update to ensure full compatibility with this panel. Always verify compatibility with your printer's motherboard and firmware before installation.
Installation Tips:
- Power off and unplug the printer before replacing the screen.
- Perform a firmware update if required by your printer model; follow official firmware instructions.
- Start with the recommended exposure settings (2s / 25s bottom) and fine-tune for your resin and printer.
- Handle the LCD with anti-static precautions and avoid touching the display surface directly.
Hashtags:
#Resin3DPrinting #3DPrinterParts #FanzyMarket
Safety Notes:
Before installation, power off and unplug the printer. Use anti-static precautions when handling electronic components and avoid touching the display surface. Do not expose the LCD to liquids or extreme heat. Firmware updates should be performed carefully; incorrect updates may damage the printer. Keep small electronic parts out of reach of children and dispose of packaging responsibly.